DECORATIV COATINGS

Ceramitz Soft

Ceramitz

Ceramitz Lux

Ceramitz Krom

Visoplast

Kromital

Kromoflex

Graniplast

Lithos

 Lumiere

Kromofin 200

Graniplast CER

Vixalit

Viero Ouartz

 Ikos

Visocalce

SilicaPaint

Visolsilica OT

Granolar

Profer

Adesan CPV 22

  Idrolith

 Idrolast

Stella Blu

Vierotone

DECORATIV COATINGS

 CERAMITZ SOFT (decorate-polychromatic and multicolor paints)

   Back

 CERAMITZ SOFT
Is a high quality continuous spray-on wall coating for all types of interior surfaces such as rendered mortars, concrete, prefabricated panels, Gypsum plasters. The exclusive multicolour soft-tone effect is achieved by the combination of various coloured aggregates contained in the product and not by pigmentation.

The resulting coating, in addition to being extremely attractive, in abrasion resistant, washable and has good breathing characteristics.

APPLICATION: By spray
Advised consumption:abt. 0.5 kg/m2

  Back

 CERAMITZ (decorate-aggregate coatings)

   Back

 CERAMITZ
CERAMITZ is a continuous architectural spray-on wall coating for all type of interior and exterior surfaces such as rendered mortars, concrete, prefabricated panels, Gypsum plasters, etc., even when peculiar shapes are present in the building. The finished coating has outstanding characteristic of elasticity to follow the slight movements of the substrate and is resistant to abrasion and shock and to stressing climatic cycles. CERAMITZ is an excellent water repellent, however its special formulation allows for the right transpiration of the substrate giving also a good resistance in time to alkali, saline air and exterior exposure.

APPLICATION:By spray
Maximum grain size:mm 0.1 – 0.8
Advised consumption:abt. 2 – 3 kg/m2

  Back

 CERAMITZ LUX

   Back

 CERAMITZ LUX
CERAMITZ LUX is a continuous architectural spray-on wall coating for all type of interior and exterior surfaces such as rendered mortars, concrete, prefabricated panels, Gypsum plasters, etc., even when peculiar shapes are present in the building. The finished coating has outstanding characteristic of elasticity to follow the slight movements of the substrate and is resistant to abrasion and shock and to stressing climatic cycles. CERAMITZ is an excellent water repellent, however its special formulation allows for the right transpiration of the substrate giving also a good resistance in time to alkali, saline air and exterior exposure.

  Back

 CERAMITZ KROM(decorate-aggregate coatings)

   Back

 CERAMITZ KROM
Is a continuous architectural spray-on wall coating for all type of interior and exterior surfaces such as rendered mortars, concrete, prefabricated panels, Gypsum plasters, etc., even when peculiar shapes are present in the building. The finished coating has outstanding characteristic of elasticity to follow the slight movements of the substrate and is resistant to abrasion and shock and to stressing climatic cycles. CERAMITZ KROM is an excellent water repellent, however its special formulation allows for the right transpiration of the substrate giving also a good resistance in time to alkali, saline air and exterior exposure.

APPLICATION:By spray
Maximum grain size:mm 0.1 – 1.5
Advised consumption:abt. 2 – 3 kg/m2

  Back

 VISOLPLAST(renovate – textured wall coatings)

   Back

 VISOLPLAST

Is a high quality continuous wall coating in a rustic trowelled texture available in two grain sizes, ideal for the protection and decoration of all types of exterior and interior surfaces such as rendered mortars, concrete, prefabricated panels, Gypsum plasters. The resulting coating is resistant to shocks, abrasion and to weathering. It is impermeable to the atmospheric waters maintaining at the same time high breathing characteristics. The product is approved by ICITE under Technical Agreement for Exterior Thermal Insulation System.

  Back

 GRANIPLAST(decorate-aggregate coatings)

   Back

 GRANIPLAST
is a high quality continuous wall coating based on natural Italian marble chips in a clear acrylic resin, available in two grain sizes. Ideal for application on all interior and exterior surfaces such as rendered mortars, concrete, Gypsum plasters, etc, whenever one wants to attain an attractive monolithic appearance in a specific coloured marble texture. The finished coating has an excellent resistance to abrasion and shocks and to stressing climatic cycles. It is impermeable to the atmospheric water maintaining at the same time high permeability to water vapour thus allowing the wall to breath..

  Back

 LITHOS (decorate – venetian stucco)

   Back

 LITHOS
Is the “Twentieth Century” version of the famous ancient Stucco Veneziano: a decorative coating with an extremely smooth and natural polished marble effect. It is a beautiful and highly refined decorative finish for hotels, offices, shops, exhibition halls, living rooms, etc. Ideal for all types of interior surfaces such as cement renders, Gypsum plasters, prefabricated panels wood and its by-products, as long as sufficiently smooth. With the range of colours and the applicator’s capacity and inspiration, it is possible to attain a variety of designs and chromatic effects.

APPLICATION: Inox trowel and spatula
Advised consumption:abt. 0.6 – 1 kg/m2

  Back

 LUMIERE(decorate-polychromatic and multicolours paints)

   Back

 LUMIERE
Is a highly refined polychromatic decorative coating system which proposes a modern version of the decoration techniques used by craftsmen in the past. The colours of the base product, combined with one or more colours of the translucent or pearly finishing coat, added to the various possible application methods: spray, trowel or rag stippling, offer an unlimited collection of possible chromatic and esthetical solutions. The resulting finish is resistant, non-toxic, washable and easy to use. It can be applied over any type of interior substrate such as: cement, Gypsum plaster, wood metals, etc. Lumiere is an excellent solution for the decoration of shops, pubs, hotels, banks and prestigious houses.

APPLICATION:	Lumiere Base By brush or roller
	Lumiere TR e NC accordino to the desired finishing
Advised consumption:	LUMIERE BASE: abt. 0.15 lt/m2
	LUMIERE TR e NC: abt. 0.2 lt/m2 per coat

  Back

KROMOFIN 2000 (decorate-polychromatic and multicolours paints)

   Back

 KROMOFIN 2000
Is a decorative paint for interiors with a multicolour effect, totally solvent free, that can be considered as a valid substitute to wall paper. Kromofin 2000 can be applied onto substrates such as cement mortars, concrete, Gypsum plasters, wood and its agglomerates, metals, etc. It is highly indicated for the decoration of public environments or rooms that will be immediately occupied because it does not release hazardous or unpleasant fumes and odours during the drying phase. Kromofin 2000 gives the possibility of attaining an infinite choice of chromatic effects to satisfy the requirements of modern interior designing. The resulting coating, in addition to being highly attractive, is abrasion resistant and washable.

APPLICATION: By spray
Advised consumption: abt. 0.25 lt/m2 for the coat of Kromofin 2000

  Back

 GRANIPLAST CER (decorate-aggregate coatings)

   Back

 GRANIPLAST CER
Is a high quality continuous wall coating based on coloured quartz grains in a clear acrylic resin. Ideal for application on all interior and exterior surfaces such as rendered mortars, concrete, Gypsum plasters, etc, whenever one wants to attain an attractive monolithic appearance in a specific coloured aggregate texture. The finished coating has an excellent resistance to abrasion and shocks and to stressing climatic cycles. It is impermeable to the atmospheric water maintaining at the same time high permeability to water vapour thus allowing the wall to breath..

APPLICATION: Inox trowel
Maximum grain size:mm 0.7 – 1.2
Advised consumption:abt. 4 kg/m2

  Back

KROMITAL (decorate-aggregate coatings)

   Back

 KROMITAL
Is a high quality continuous wall coating based on coloured marble chips in a clear acrylic resin. Ideal for application on all interior and exterior surfaces such as rendered mortars, concrete, Gypsum plasters, etc, whenever one wants to attain an attractive monolithic appearance in a specific coloured marble texture. The finished coating has an excellent resistance to abrasion and shocks and to stressing climatic cycles. It is impermeable to the atmospheric water maintaining at the same time high permeability to water vapour thus allowing the wall to breath.

APPLICATION:Inox trowel
Maximum grain size:mm 1 – 1.5
Advised consumption:abt. 4 kg/m2

  Back

 VIXALIT(renovate-lime based paints)

   Back

 VIXALIT
Vixalit is an ideal finish for all interior and exterior mineral based substrates such as rendered mortars, concrete and lime based mortars. Specifically recommended for use in restoration and maintenance of old buildings of historical and cultural value traditionally finished with lime. The perfect solution when one wants to attain soft-shaded, natural decorative finish with an antique effect. Vixalit is a natural ecological paint with good stability and workability.
APPLICATION:By brush
Advised consumption:abt. 0.3 – 0.4 kg/m2 (classical application in 2 coats)

  Back

IKOS(renovate-lime based wall coatings)

   Back

  IKOS
IKOS is a lime based, decorative wall finishing system. It can be applied both on interiors or exteriors, on sound new renders where no special treatment is required, as well as on restored renders where high breathing properties are essential. Ikos is ideal to give a refined decorative finish for hotels, offices, shops, exhibition halls, homes, etc. With two different application techniques, it is possible to achieve either a smooth trowelled finish, ideal for interiors, or, prior the application of a base render, create a spotted marble effect similar to the traditional Encausto.

APPLICATION:Inoxtrowel
Advised consumption:abt. 0.6 kg/m2

  Back

 VISOLCALCE(renovate-lime based paints)

   Back

 VISOLCALCE
VISOLCALCE is a coloured, mineral wall coating in paste form, based on lime putty, available in three grain sizes. It is especially indicated for external and internal finishes of new or old buildings of historical or artistic importance. This product has excellent characteristics of colour stability, high permeability to water vapour, good resistance to fire and the soft, shaded and natural appearance typical of traditional old wall coating.

  Back

 SILICA PAINT(renovate-silica based paints)

   Back

 SILICA PAINT
SILICA PAINT is a potassium silicate based, pigmented paint, excellent for use on old mineral based substrata such as rendered mortars that have to be restored and consolidated as well as for new buildings. It has high vapour permeability with low water absorption, good colour stability, long duration in time and has a low dirt pick-up. It is not flammable, ecological and has a good natural resistance to fungi and bacterial attacks. It is easy to apply and has the soft and natural appearance typical of mineral coatings.

  Back

KROMOFLEX(decorate-polychromatic and multicolors paints)

   Back

 KROMOFLEX
Is a decorative paint for interiors with a multicolour effect that can be considered as a valid substitute to wall paper. Kromoflex can be applied onto various substrata such as cement mortars, concrete, Gypsum plasters, wood and its agglomerates, metals, etc. It gives the possibility of attaining an infinite choice of chromatic effects to satisfy the requirements of modern interior designing. The resulting coating, in addition to being highly attractive, is abrasion resistant and washable.

APPLICATION: By spray
Advised consumption: abt. 0.25 lt/m2

  Back

PROFER(restore-cement based restoring products)

   Back

 PROFER
Is a cement based, anti-corrosive, 2-pack, coating for reinforcing steel. It is a high performance coating for protecting reinforcement steel in the concrete repair system. It is an alkaline product which has good adhesion and is highly impermeable to water, carbon dioxide and other acid airborne gasses thus providing a long lasting anti-corrosion protection to the reinforcing steel.

  Back

 VIEROQUARTZ

   Back