Utilaje si accesorii pentru santier

Back

T.F. 83 saw can cut any kind of material, marble, granite, stones. Cutting is possible by manual pushing of the holder motor unit or by chain being efficacious and safety.
Champfers, 45° jolly, horizontal cuts can be made easily. The blade lows by a handwheel installed on a reductiion gear.
Feet are removable.
Grinding wheels can be set up on the blade (not for massproduction work). For its versatility, it can make a work such that made by the authomatic saws, then, tolerance for cutting machine cm. 300 can be limited to 1 mm ½.
Stand with rolls and aluminium square are given apart on demand.

TF cm 100
Working cutting length: 100 cm
Cut thickness: 7 cm Dimensions: 165x93x147 cm Weight: 115 kg Blade diameter: mm 250/300/350
Three-phase electric motor HP4 220/380V (on request single phase motor HP3 220V). Immersion motor driven pump

TF cm 150
Working cutting length: 150 cm
Cut thickness:7 cm Dimensions: 222x93x147 cm
Weight: 170 kg Blade diameter: mm 250/300/350
Three-phase electric motor HP4 220/380V (on request single phase motor HP3 220V)
Immersion motor driven pump

TF cm 200
Working cutting length: cm 200
Cut thickness:cm 7Dimensions: 250x93x147 cm
Weight: kg 190 Blade diameter: mm 250/300/350
Three-phase electric motor HP4 220/380V (on request single phase motor HP3 220V)
Immersion motor driven pump

TF cm 250
Working cutting length: cm 250
Cut tickness: cm 7 Dimensions: 326x100x147 cm
Weight: kg 320 Blade diameter: mm 250/300/350
Three-phase electric motor HP5.5 220/380V (on request single phase motor HP3 220V)
Immersion motor driven pump

TF cm 300
Working cutting length: cm 300
Cut tickness: cm 7 Dimensions: 372x100x147 cm Weight: kg 365
Blade diameter: mm 250/300/350
Three-phase electric motor HP5.5 220/380V (on request single phase motor HP3 220V). Immersion motor driven pump

Back

Back
Back	Specific feature	C E75C	CE95C
	mm	1170x570x725	1370x570x725
	Kg	58	66
	x=mm	770	970
	y=mm	65	65
	Ф/i=mm	250/30	25/30
	rot/min	2800	2800
	Kw-Hp	1.1-1.5	1.1-1.5
	V/Hz	230/50	230/50

Back
Back	Specific feature	E160/H	E160/W	E160/A
	mm	2370x830x960	2370x830x960	2480x830x960
	Kg	185	215	230
	x=mm	1600	1600	1600
	z=mm	105	125	125
	Ф/i=mm	350/30	410/30	410/30
	rot/min	2800	2800	2800
	Kw-Hp	2-3	4-5.5	4-5.5
	V/Hz	230/50 1faza	400/50 3faze	400/50 3faze

Back
	Specific feature	Euromec65	Euromec100	Euromec130
	mm	1100x700x820	1450x700x820	1750x700x820
	Kg	120	130	144
	x=mm	650	1000	1300
	z=mm	105	105	105
	Ф/i=mm	350/30	350/30	350/30
	rot/min	2800	2800	2800
	Kw-Hp	2-3	2-3	2-34-5.5
Back	V/Hz	230/50 1faza	230/50 1faza	230/50 1faza

Back
Back	Specific feature	Moon3200	Moon2000
	mm	4300x1000x1500	3300x1200x2200
	Kg	1000	420
	x=mm	3250	2230
	z=mm	230	160
	Ф/i=mm	400/30	410/30
	rot/min	2800	2800
	Kw-Hp	5-7	5-7
	0 / 45 grade	Da	Da

Back
Back	Specific feature	Eclipse 3000
	mm	4350x1600x2000
	Kg	900
	x=mm	3100
	z=mm	150
	Ф/i=mm	500/50
	rot/min	1400-2800
	Kw-Hp	7.5-10
	0 / 90 grade	Da

Back
	T.M. 90 T.M. 90 can cut any kind of material. Cutting is performed by hand feed of plate holder motor unit. This cutter can cut efficaciously and safety also pieces of various weights and sizes that cannot be cut with other saws and especially by sliding carriage cutters. Champfers, 45° Jolly, horizontal cuts can be made easily. The plate lows by means of a handwheel. Legs can be removed by knobs.
Back